The Fresh Loaf

A Community of Amateur Bakers and Artisan Bread Enthusiasts.

Most bookmarked

davidg618's picture
davidg618

Baguettes, and the K.I.S.S. principle

My wife and I have differing opinions about sourdough--I like it tangy, she likes it mild; sandwich bread--I like its crumb chewy, she likes it soft and fluffy; and biscotti--I prefer parmesan cheese, and black pepper, she craves ameretto-almond. But when it comes to baguettes we are 100% in accord: wheaty flavor, lightly chewy, open crumb, crackling crust. And in that order.

I've spent nearly two years working on a formula, and a process that yields what we want. I've learned quite a few things about baking in general, and baguettes in particular. I've also relearned a few lessons about myself. In this moment, I think I've reached the semi-experienced novice level--somewhat akin to the Sorcerer's Apprentice.

Please, this is just my offering of what I've found works for me. 

Here's what I've learned about a formula: use quality ingredients; don't obsess over the quality.

Flours:I've lusted over descriptions of French milled flours, King Arthur's French-style, and Guisto's artisan flours: lusts never realized. It's simply a cost decision. I use King Arthur's super-market accessible, all-purpose flour. I've made a couple of excursions into other brands, with consistent disappointment. One brand's flavor was really nasty.

Salt: I use sea salt, purchased in bulk from a local organic food store. It's ridiculously inexpensive. My children, knowing my Foodie obsessions have gifted me, more than once, with Sal de Very Expensive. I've used it. I can't discern a difference; neither can my wife.

Water: Our well. (Suwannee River aquifer)

Yeast: SAF: as little as possible.

Flour (one kind), salt, water, yeast: it doesn't get any simpler than that.

Process: Herein, I've learned  the biggest lessons. K.I.S.S.--Keep it Simple, Stupid! (I learned this, the first time, from a Navy Chief Petty Officer, when I was a bottom-of-the-ladder Seaman)--outpaces them all.

A few general lessons: These support K.I.S.S.

Be consistent: Use the same ingredients. Same brand, same type, same weight ratios, same temperatures, etc.. Which of course you won't so...

Make small changes (only one at a time if you have the discipline; I'm not yet that disciplined, but I am at the point that I never make more than two.)

Be consistent: Do the same steps, with the same tools, in the same order, for the same duration, at the same temperatures , etc.. Which of course you won't so...

Keep notes: what you used, what you did, what you changed, what you forgot, what resulted, what you're going to do next. Also, at the beginning of a follow-on bake review your previous notes, and write down what you're going to do. Underline the change(s).

Baguette specific lessons:

These are the things that work for me, with K.I.S.S. always in mind. I marvel at the time and effort other TFL'ers put into baking baguettes. I'm certain their results make my baguettes reminiscent of dog biscuits. Nonetheless, we (my wife and I) are happy with our results, so far, and the neighbors make complementary noises with their mouths full.

Flavor develops during fermentation: Yes, you've got to use ingredients you trust. They have to be capable of giving good flavor, but it's fermentation that exploits those qualities. Up to a point, retarded (chilled) fermentation develops flavor proportionate with the fermentation duration. I don't know what that point is. I've learned I get desirable flavor between 15 hours and 21 hours of retarding at 54°F. Furthermore, the desired flavors are more present after 21 hours compared to 15. hours. I'm fortunate to have a wine closet wherein the temperature is maintained at 54°F. I've not attempted retarding in a refrigerator--most home fridges are 38°F-40°F--but from reading TFL other bakers are having great successes.

Hydration differences don't seem to change the flavor profile significantly, or, at least, not as significantly as retardation time. I've investigated from 65% hydration to 72% hydration. Arguably, the more flour, slightly more flavor in that Hydration range, whereas, 15 hour retardation yields an excellent flavor, 21 hours a bigger excellent flavor.

Substituting sourdough levain for commercial yeast, makes a different bread. It's sourdough in a baguette shape. Delicious, sometimes, but not an accurate rendition of the modern baguette. Furthermore, sourdough levain masks the delightfully "wheaty" flavors a baguette can (and should) have.  White flour, salt, water, and yeast: it doesn't get any simpler than that. (I'm looking forward to the hiding I'll get for this comment.)

Open crumb structure improves with retarded fermentation. I'm fairly sure this is accurate, however, mishandling can massacre the gain.

Don't ignore DDT. It gives one a finer control over results from retardation. Don't think of DDT as just small adjustments to room temperature water to hit the "magic" 76°F or 80°F. Pre-chill the formula's flour and use ice water in the dough's prep, to bring the mix to the planned chill temperature immediately. Chill the dough during autolyse, and return it to the chiller immediately after each manipulation, e.g., S&F.

Process, i.e., techniques: their flow and finesse, account for more than 50% of a baking success, especially with baguettes. (I actuallly think its considerably greater than 50%, but, then again, 85% of all people make up their own statistics.)

Here's a series of photos I took today of a 65% Hydration, 21 hour retarded baguette bake.

I've documented my earliest attempts to make baguettes here http://www.thefreshloaf.com/node/16377/overnight-baguettes  . It gives the 72% hydration formula I started with. Most of my subsequent many tweaks involved exploring hydration, and retarding effects.

This is my post-retardation setup: I preshape the baguettes immediately and leave them to rest for 1 hour at room temperature.

After 1 hour rest, I shape and proof the baguettes (seam side up). Proofing time today was 1 hour.

Here is the second loaf, slashed, and ready for loading into the oven. After many attempts, with various commercial peels, to load baguette loaves either serially, or in multiples I've settled on loading them serially with a home-made peel--it's really just a scrap piece of birch plywood, cut 2" narrower than my oven. I also load sourdough loaves (2) side-by-side serially using the board held along the narrow side. It works better than any of the commercial peels I've purchased--including the Superpeel.

I load the peel by simply flipping the loaf onto the rice flour dusted board, and slashing it. Then right into the oven, one at a time.

The oven, loaded to its meager capacity: 3 baguettes. You can see the only down-side to serially loading I've experienced. Oven-spring is already well underway in the first two loaves.

On the top shelf you can see the way I generate steam: two wetted towels. SylviaH convinced me to try this approach, and after the first try I stuck to it, but I made it simpler than her method (involves heating towels in the microwave). I wet the towel with 2-3 cups of the hottest tap water. I put the wet-towel tray on the top shelf, and switch the oven control from "Convection Bake" to "Broil" at 550°F. I do this about 6 to 10 minutes before loading the first loaf. I can watch the wetted towels begin to bubble. I switch the oven to "Bake" (conventional, shutting off the convection fan) at 500°F. Finally, after all loaves are loaded, I decrease the oven to "Bake" 450°F. After 10 minutes I remove the steam pan, restore "Convection Bake", and finish the baking. Early in my trials I discovered the rear-mounted convection fan dried out the surface of the most rearward loaf, and inhibited oven-spring. That's why I do all the oven mode switching.

Results:

and the crumb.

Recall, this is a 65% hydrated dough. It's consistent open crumb like this that supports my arguement retarded fermentation supports open crumb development.

So far, I've not lost sight of K.I.S.S. I bake baguettes once each week, so if you see where I can make it simpler, please comment.

David G

txfarmer's picture
txfarmer

Whole Wheat Croissant with Sourdough Starter - add savoury fillings in case it's not rich enough

Sending this to Yeastspotting.

Click here for my blog index.

This is inspired by the ww croissant formula from "AB&P", but I used sourdough starter to make a levain, rather than the original sponge. Also adjusted the liquid ratio (as well as a lot of other things), the original formula was a bit too wet, the dough was too soft and went "faster" than the butter block when rolled out. Yolk and milk in the formula do a good job of tenderising the ww dough,croissants were beyond delicate. Gotta say the ww flavor went perfectly with the the rich buttery taste, add sourdough on top, it's my favorite croissant dough so far! "AB&P" suggests that it would go well with savoury fillings, and they are right. I used some for sandwich, also made a few ham/cheddar & spinach/feta croissants, both were heavenly.

WW Croissant with Natural Starter (adapted from "AB&P")

Note: makes 12 croissants

Note: for details and tips, please see this post

Note: for more tips on making croissants in warm weather, see here

-Levain

100% starter, 30g

water, 48g

bread flour, 89g

1. mix and let mature for 12 hours.

-Final Dough

bread flour (KAF), 309g

ww flour (KAF), 103g

milk, 187g (before adjustment, it was 195g of water)

egg yolk, 43g

sugar, 53g

salt, 7g

osmotolerant instant yeast (SAF gold), 4g, 1tsp+1/4tsp

butter, 25g, softened

levain, all

roll-in butter, 287g

1. Mix everything but the roll-in butter, knead until gluten starts to form. In my KA mixer, 3min at first speed, 5 min at 3rd speed.

2. Then following the procedure illustrated here to make normal ones. For ham/cheese, spinach cheese ones, cut dough into 5.25inchX9inch pieces, lay ham and cheese(or spinach and cheese) on top near bottom, roll along the short edge twice with seam on the bottom. Cut the roll into 3 pieces, each 3inch wide.

First batch, before adjusting liquid, the dough was a tad too soft. Crumb was still nice and open, but a little "messy", walls of the "holes" were not crisp.

After adjusting the liquid, structure was more crisp. The difference was not huge, probably just obvious to my own picky eyes.

With liquid amount adjusted, but rolled out a bit thinner than usual to get more layers. The "holes" are clean and separated, however, a bit too small, I probably won't roll the dough out so thin next time, even though some of my tasters liked this version.

Makes a GREAT sandwich, I love how this cut surface looks. It shows a different perspective on the crumb structure.

Of course the ones with filling rolled in were super yummy too, look at the leaking cheese

However you make them, I highly recommend this formula!

asfolks's picture
asfolks

Le pavé d’autrefois

Loosely based on the formula for Le pavé d’autrefois
(Old fashioned slab) in the book,  Le Pain, l’envers du décor (Bread, behind the scenes) by Frédéric Lalos.

His version used commercial yeast and a poolish.

Ingredients:

Levain:

100% hydration fed with KA Bread flour – 300g

Soaker:

Water – 564g

KA Whole Wheat flour – 107g

Bay State Medium Rye – 71g

Bob’s Red Mill Buckwheat flour – 71g

KA Bread flour – 315g

Final Dough:

KA AP flour – 286g

Sea Salt – 20g

Process:

Fed active starter 8 hours prior to mix and fermented at 70°F

Flour soaker established 3 hours to
mix and held at 70°F

Mixed Levain, Soaker and Final 286g of
AP flour by hand and rest for 30 minutes.

Add salt.

Stretch and Fold at 00:15, 00:30,
00:45, 01:15, 02:15 for a total bulk ferment of 4 hours.

Turn out dough onto heavily floured
surface and fold over on itself. Rest 1 hour covered.

Spread out dough by dimpling with fingertips.
Rest 1 hour covered.

Cut into slabs of desired size and
bake on stone in preheated oven at 460°F for 35-45 minutes, depending on size.

This was a fragrant and tasty bread , somewhat like a rustic lower hydration ciabatta.

dmsnyder's picture
dmsnyder

Rustic Sourdough Baguettes after Phillipe Gosselin

Two months ago, after enjoying Phillipe Gosselin's “baguettes tradition” in Paris, I attempted to replicate this delicious bread in a sourdough version. (Baguette Tradition after Phillip Gosselin) My wife and I actually preferred my version to the original. In fact, I felt they were the best tasting sourdough baguettes I'd ever made.

 Yesterday, I made them again. This time, I omitted the little bit of instant yeast I had used with the first bake. Interestingly enough, my fermentation time was just about the same as with the added yeast.

The other difference was I used a new (to me) flour from Central Milling. According to brother Glenn, Nicky Giusto told him this is the flour Acme uses for their much-admired baguettes. I hesitate to generalize from a single bake with it, but it made a very chewy baguette crumb with good flavor. I'm looking forward to using it on some other breads with which I am more experienced.

Ingredients

Wt.

Baker's %

Central Milling Organic “ABC” Flour

400 g

100

Ice Water

275 g

69

Salt

8.75 g

2

Liquid Levain

200 g

50

Instant yeast (optional)

¼ tsp

 

Total

883.75 g

221

Note: Accounting for the flour and water in the levain, the total flour is 500 g and the total water is 375 g, making the actual dough hydration 75%. The actual salt percentage is 1.75%.

Method

  1. The night before baking, mix the flour and levain with 225 g of ice water and immediately refrigerate.

  2. The next morning, add the salt and 50 g of ice water to the dough and mix thoroughly. (I did this by hand by squishing the dough between my fingers until the water was fully incorporated.)

  3. Place the dough in a lightly greased bowl with a tight cover.

  4. Ferment at room temperature until the dough has about doubled in volume. (3 hours for me) Do stretch and folds in the bowl every 30 minutes for the first two hours.

  5. An hour before baking, pre-heat the oven to 500ºF, with baking stone and steaming apparatus in place.

  6. Divide the dough into 4 more or less equal pieces and stretch each into a 12-14 inch long “baguette.”

  7. Score and bake immediately at 460ºF, with steam for 10 minutes, and for about 20 minutes total.

  8. Cool on a rack before eating.

David

dmsnyder's picture
dmsnyder

Pane tipo di Altamura from "Local Breads"

Franko's recent blog about his project to bake Pane tipo di Altamura (Pane di Altamura...my ongoing project) reminded me that this bread had gotten lost on my “to bake list.” I have baked a number of breads with semolina and a couple with durum (finely milled durum flour) my favorite of which has been Tom Cat's Semolina Filone from Maggie Glezer's "Artisan Breads".  However, I've never before baked an 100% durum bread. My reading about the Pane di Altamura and Franko's blog inspired me to attempt this bread, finally.

I have three books with formula's for Pane tipo di Altamura: Carol Field's “The Italian Baker,” Franko Galli's “The Il Fornaio Baking Book” and Daniel Leader's “Local Breads.” The first two use a yeasted biga and additional commercial yeast. They also use a mix of bread flour and semolina. Leader's formula uses a biga started with yoghurt and semolina flour. Leader's formula also differs from the other two in specifying a higher dough hydration. Based on my bias in favor of wild yeast and my past positive experiences with breads from Leader's book, I based my formula on his.

I deviated from Leader's formula and method in a number of ways which I will describe. I converted my stock starter to a durum biga and did not use yoghurt. The major compromise was that I only fed my starter once with durum flour. I had planned on three refreshments before the final mix, but the weather forecast is for temperatures over 105ºF for the rest of the weekend. Since it is only expected to get to a chilly 98ºF today, it seemed prudent to bump up the baking schedule and try to avoid using the oven when it's 105 or 107ºF. So, what's described is what I actually did, with notes indicating significant deviations from Leader.

Semolina biga

Wt.

Baker's %

Active sourdough starter

50 g

71

Fancy durum flour

70 g

100

Water

57 g

81

Total

177 g

252

  1. Disperse the starter in the water. Add the flour and mix thoroughly.

  2. Ferment at room temperature for 12-14 hours.

Notes

1. Ideally, one would add one or two additional builds to convert the biga to 100% durum.

2. Leader's formula for the final dough calls for 200 g of semolina biga, but his formula for the biga produces only 177 g. If you follow Leader's formula, you need to build more biga than this.

Final dough

Wt.

Baker's %

Semolina biga

170 g

34

Fancy durum flour

500 g

100

Water

350 g

70

Salt

15 g

3

Total

1035 g

207

Notes

  1. Leader's formula calls for 200 g of biga. I was only able to use 170 g. Given the very warm kitchen temperature today, using less starter is probably reasonable.

  2. Accounting for the flour and water in the biga, the final dough hydration is actually 71%.

  3. Leader specifies 3% salt in his formula without indicating why this bread has more salt than the usual 2%. Note that, if you calculate the baker's percentage of salt accounting for the flour in the biga, 15 g is actually 2.6% of the total flour

Method

  1. Mix the final refreshment of the biga 8-12 hours before the final dough mix and ferment it at room temperature.

  2. In the bowl of a stand mixer, disperse the biga in the water. Add the flour and mix with the paddle for 1 minute.

  3. Cover the bowl and autolyse for 20 minutes. (Note: Leader does not call for an autolyse, and, as far as I can tell, this is not used in Altamura.)

  4. Add the salt, and mix with the dough hook at Speed 3 for 5 minutes. The dough should be smooth and pass the window pane test. (Note: Leader says to mix at Speed 4 for 10-12 minutes. However, my dough was very smooth and passed the window pane test after 5 minutes at Speed 3. Perhaps this was a benefit of the autolyse.)

  5. Transfer the dough to a lightly oiled 2 qt container.

  6. Ferment with the bowl tightly covered for 3-4 hours or until the dough has doubled in volume. Stretch and fold in the bowl at 30 and 60 minutes. (Note: Leader does not call for the S&F's.)

  7. Transfer the dough to a lightly floured board. Shape into a boule.

  8. Dust the boule with semolina flour and place it in the center of a clean, dry kitchen towel dusted with semolina. Bring the corners of the towel to the center and tie them, “to make a snug bundle.” (Note: Leader describes this procedure being used in the Altamura bakery he visited and by the village women who brought their own dough to the bakery for baking. However, the videos I've seen of Altamura bakeries in action show the loaves being proofed en couche.)

  9. Proof the loaf at room temperature until it “balloons inside the kitchen towel” - 1-1/2 to 2 hours. The loaf is ready to bake when an indentation made by poking a finger into it springs back slowly. (Note: My loaf was proofed for 90 minutes in a 78ºF kitchen. The surface of the loaf was quite dry at the end of proofing. I imagine this contributes to the famously chaotic blooming of the folded loaf during baking.)

  10. About an hour before baking, preheat the oven to 500ºF with a baking stone and steaming apparatus in place.

  11. Transfer the loaf to a lightly floured board.

  12. Stretch the loaf into a rectangle about 6 x 16 inches, with a narrow side nearest you. Fold the near edge all the way up to meet the top edge, and seal the seam. Now, bring the folded near edge 3/4 of the way up towards the far edge, and seal the seam all the way around so the lip of the far part of the loaf is flattened. The loaf should now be shaped as a half-circle. (Note: An alternative, shape, which is also traditional, called a “priest's hat” is made by cutting a very deep cross into the boule with a bench knife and pulling the corners well apart. The opening is then dusted with semolina flour to keep it from sealing during oven spring.)

  13. Transfer the loaf to a peel dusted with semolina flour and dust the surface of the loaf with flour.

  14. Turn the oven temperature down to 400ºF. Transfer the loaf to the baking stone . Steam the oven lightly.

  15. Bake for 40 to 50 minutes until the loaf is “mahogany-colored all over and golden where it splits open.” (I removed my steaming pan after 15 minutes and switched to convection bake at 375ºF for the remainder of the bake.)

  16. Transfer the loaf to a cooling rack and cool for at least 1 hour before slicing.

    Initial mix before autolyse

    Dough mixed, ready for bulk fermentation

Pre-shaped boule, ready for proofing

 

Proofing 

Proofed and ready for the final shaping

Dough stretched out. First step in final shaping.

Shaped loaf, ready to bake

Pane tipo di Altamura

Pane tipo di Altamura crumb

Pane tipo di Altamura crumb close-up

The aroma and flavor of the bread are most remarkable for a prominent sourdough tang. The flavor otherwise is very nice, but I cannot identify distinctive flavors I would associate with durum, as opposed to other wheat flours. The crust is chewy over the fat part of the loaf but quite crisp over the flatter part.

David

Submitted to YeastSpotting

sortachef's picture
sortachef

Baking Bread in a Woodfired Oven: the Basics

I baked some lovely loaves in my oven the other day, and as I slid that smoky, crusty bread out and onto cooling racks, I couldn't help thinking of those old European bakers, who've been baking with fire for hundreds of years. The limited size of my oven, however, has led me to adopt some measures that may or may not be part of that tradition. They work for me, and they might work for you too.  

To make it simple, I’ll break it down.

Overview: To bake 4 loaves in a 40” diameter woodfired oven, you'll need about 7 pounds of dough. The free-standing loaves will bake in a semi-circle around a hot but barely flaming mound of coals pushed to the back. Key to success in this kind of baking is to have the floor evenly heated before the loaves go in. I have a loose-fitting metal door for my oven, which acts as a damper and which I close when the loaves are baking.

The Dough: Unless you have a complicated steam-injection system as some French bakers have for their brick ovens, you won’t be able to get enough steam into your oven to make much of a difference in the bloom. Either the masonry will absorb the humidity almost at once, or you will be splashing on water, which can crack the hot base. Instead, in order to get a big round loaf, a good crust and a soft, well-textured crumb, you need to create a dough that is wetter than we Americans think is normal.

I’ve been working with wet doughs in the 65-70% range for longer than I’ve had a WFO, ever since I saw a Roman baker literally throw the dough out of a bucket and onto a long wooden peel at Forno in the Campo dei Fiori. While I don’t recommend a dough quite that wet (it had to be 80-85%), I do recommend bumping up the hydration a bit for woodfired baking.

Joe Ortiz in his book The Village Baker has some excellent tips (page 55) on how to do this. Making a sponge, letting the dough sit overnight, and using less yeast are all good advice. I would add to this letting the dough hydrate for an hour before kneading and having a good dough scraper handy for bench work. For one recipe that follows this technique, see Lago di Como Bread.

Slow Rising: Once you’ve made a wet dough, you need to let it rise for an ample time. I’m being deliberately vague, because temperature and time become fluid at this stage. With less yeast or a starter, at 50° the first doubling can take 5 hours or more. I let this part happen in its good time, and then slowly warm the dough for the next phase, because once the dough is active, it’s very important to have the oven heated to the right temperature at the right time.

Gradually raise the dough temperature to 70° in the second rise, giving the dough a fold after an hour or so. Now is the time to get your oven hot. In another hour, once the dough is showing springiness and a few big bubbles, you can make the loaves.

The Loaves:  Bannetons are lovely to work with but are expensive. Instead, I use plastic bread baskets lined with cloth napkins or dish cloths, with a coating of coarse flour rubbed into the fabric. These work beautifully as proofing baskets for my finished loaves.

Once the dough has nearly doubled in size again, turn it out onto a floured surface. Deflate about half of the gas out of it and cut it into 4 pieces. The perfect weight for me based on oven size is 27 ounces per loaf, which allows some leftover dough for another day. Form your loaves and put them into the cloth-lined baskets to rise. At 70° this will take 45 minutes.

When ready to bake, turn the loaves out onto floured peels.  Shape lightly, tucking edges under without deflating the dough and slash a design with a lame if desired. 

The Fire:  There are so many variables inherent in making a fire in a woodfired oven that I’m loath to give specific directions. Atmospheric conditions, the length of time since your oven was last fired, the type of wood you’re using and how it was cured all play a role. If your oven is outdoors, as most are, you’ll want to baby it when the weather is cold. See Moderating Heat in a Woodfired Oven for more on this.

Generally speaking, though, your fire should be at least 2 hours old with a good base of coals by the time you put in the bread. In the last hour, push the fire around from side to side to make sure the base of the oven gets heated evenly, adding small branches and an occasional wrist-thick log as necessary to keep a good fire going. During this time, using a set of bellows to fan the flames is optimal.

The Oven: As the fire pulses and flames, you should be paying attention to the oven walls, floor and door. I check the heat of the door handle, the amount of flame, the amount of whitening ash on the ceiling and walls and the floor temperature about every 10 minutes after the fire is going full force.

In the first hour, if the fire is raging and throwing flame on the oven ceiling, I slow it down by closing the door all but 2” to stop it ‘overfiring’. Otherwise, I leave the door off as the fire matures, and put it in place cocked about 4” open toward the end of the first hour. By then, the door handle should be warm to the touch but not hot, there should be a small amount of whitening on the ceiling, and near the doorway the floor of the oven should be warm to the touch.

In the second hour, move the fire side to side so that the floor heats evenly. Toward the end, the door handle should be quite hot, the ceiling of the oven should be half white and the floor of the oven near the doorway should be too hot to touch for more than a second. Now you’re ready to bake.

Push the mature coals to the back center of the oven, near the wall, and brush the ashes off of the floor.  There should be 6 to 8 fist-sized chunks of glowing hardwood coal and a good bed of embers, but little or no flame when the loaves go in.

The Baking Procedure: Make sure each finished loaf can ‘slip’ on its peel. Slip each loaf into the oven to have a long side parallel to and 10” from the coals. Close the door. Use this rough timeline for baking:

  • After 20 minutes, turn loaves so the other side faces the fire.
  • After 20 minutes, turn loaves so one end faces the fire.
  • After 10 minutes, turn loaves so the other end faces the fire.
  • After 15 minutes, remove loaves to a rack to cool.

 

Trouble-shooting: Besides the obvious problem of getting the oven and the dough ready at the same time, I’ve encountered two main difficulties in baking perfect loaves in my woodfired oven: a stubborn fire and a cold floor. Often they coincide.

When the atmosphere is damp and heavy, the fire is stubborn as a result. I counter this by keeping some ultra-dry wood on hand inside my house, adding it to give my fire the extra boost it needs. Even then, under certain conditions, it can be a real challenge to maintain a good fire.  

The other is when the oven hasn’t been used in a while and the floor is slow to heat. In dry conditions, you can usually overcome this with a bit of extra time. However, if this happens when you’re dealing with a slow fire as well, the floor may not get hot enough to put a firm base on your bread. Be very careful when turning your loaves in this condition. To counter, warm some quarry tiles or a pizza stone to 450° in your indoor oven to finish off the loaves for 10 minutes after WFO baking. It may not be the ‘purist’ thing to do, but it works!

Suggested reading:

The Village Baker by Joe Ortiz, Copyright 1993 by Ten Speed Press, Berkeley

The Italian Baker by Carol Field, Copyright 1985 by Harper Collins

Also see www.woodfiredkitchen.com for more tips, techniques and recipes. Flame On!

txfarmer's picture
txfarmer

SD 100% WW banana sandwich loaf - still not the quick kind

Another soft SD 100% whole wheat sandwich loaf from me - these are our favorite breakfast item. The inspiration came from the super light banana sandwich bread in Rose Levy Beranbaum's "Bread Bible" (Farine adapted it into a free form loaf with great scoring pattern here, she also has the original formula there), I replaced all of the flour with KAF ww, dry yeast with sourdough starter, and changed fermentation schedule accordingly. Sticking to the method of intensive kneading + long cold fermentation, it was another soft, tall, flavorful ww loaf.

 

Sourdough 100% Whole Wheat Banana Sandwich Bread

Note: 15% of the flour is in levain

Note: total flour is 420g, fit a my Chinese small-ish pullman pan (shown in picture), for US 8X4 loaf pan, I would suggest 455g of flour.

 

- levain

ww starter (100%), 18g

milk, 29g

ww bread flour, 54g

1. Mix and let fermentation at room temp (73F) for 12 hours.

 

- final dough

ww flour, 357g (I used KAF)

banana puree, 168g

honey, 29g

water, 130g

butter, 29g, softened

milk powder, 29g

salt, 8g

all levain

2. Mix together everything but butter, autolyse for 40-60min. Add butter, Knead until the dough is very developed. This intensive kneading is the key to a soft crumb, and proper volume. The windowpane will be thin and speckled with bran grains, but NOT as strong as one would get form a white flour dough. For more info on intensive kneading, see here.

3. Rise at room temp (74F) for 2 hours. Punch down, put in fridge overnight.

4. Take out dough, punch down, divide and rest for one hour.

5. Shape into sandwich loaves, the goal here is to get rid of all air bubles in the dough, and shape them very tightly and uniformly, this way the crumb of final breads would be even and velvety, with no unsightly holes. For different ways to shape (rolling once or twice, i.e. 3 piecing etc) see here.

6. Proof until the dough reaches one inch higher than the tin (for 8X4 inch tin), or 80% full (for pullman pan). About 5 hours at 74F.

9. Bake at 375F for 40-45min. Brush with butter when it's warm.

 

You can't really taste the banana, but it does soften the crumb and lends a very subtle sweetness. Perfect with some PB, one of my favorite SD 100% ww sandwich loaves so far.

 

Sending this to Yeastspotting.

txfarmer's picture
txfarmer

Corn Bread - not the quick kind

Another formula from "Advanced Bread and Pastry"  - it's a yeast bread with nearly 40% of corn flour and corn meal, which yields a strong corn flavor. The formula uses both firm preferment and liquid poolish, the former for strength (since the corn flour/meal ratio is relatively high), the latter for extra flavor. There's no sugar in the dough, but corn flour/meal has a natural sweetness that shines through . I mostly stuck to the original recipe, but did increase hydration a little bit, even at 70%, the dough is on the drier side, next time, I might increase even more.

-poolish
Bread Flour, 89g
water, 89g
salt, 1/8tsp
yeast, 1/8tsp

1. mix and leave at room temp for 12-16hours

-preferment
Bread Flour, 195g
water, 128g
yeast, 1/8tsp
salt, 3.55g

2. mix and leave at room temp for one hour, put in fridge overnight

-final dough

Bread Flour, 67.5g
corn flour, 177.5g
cornmeal, 28g
water, 155g (about 30g more than original)
salt, 7g
yeast, 3.5g
butter, 4g

poolish, all

preferment, all

 

3. Mix and autolyse for 30min. knead at medium speed for 3 min, until gluten starts to develope.

4. Bulk rise at 80F for 1.5 hour, S&F at 30 and 60min. The dough is fairly strong.

5. Divide into two, round and rest for 20 to 30min. shape: for one piece I shaped into triangle, the other shaped according to this video. Proof at 76F for about one hour. The dough would've expanded noticably but not doubled, when poked lightly, it will spring back slowly.

6. Score , creatively. The dough is on the stiffer side, so it scores very easily.

7. Bake at 450F for 40min, the first 15 with steam.

LOVE how both loaves looked, I thought the exterior is as "corn-ish" as how it tastes.

 

Nice crackly crust, with good volume/ovenspring

 

Crumb is even, even a bit "fluffy", without big holes - as expected due to higher ratio of corn flour/meal, and relatively less water.

 

If you like quick cornbread or corn tortilla, which we do, you will love how this bread tastes. Not a "sweet bread" per se, but with a strong sweet corn flavor.

 

Easy and tasty, looks impressive too.

 

Sending this to Yeastspotting.

teketeke's picture
teketeke

English muffin with raisin yeast water plus alcoholic raisins

English muffin with raisin yeast water + alcoholic raisins.

Updated 5/9/2011  I found out that skipping the first proof had a good result of English muffin shape and more flavor . Thanks to everybody who left some notice on my English muffin, I could find the difference. Thank you, Syd and Kimmy and Larry and Daisy and Ron and everybody! When I use the first proof, the muffin inflated like a balloon. The taste was weaken.

I tested this English muffins without the alcoholic raisins, it came out flavorless.  They are one of our breakfast menu once a week.

I also leave the method to make raisin yeast water here for reference.   Alcoholic raisins are in the raisin yeast water.

http://www.thefreshloaf.com/node/23809/how-i-make-and-maintain-raisin-yeast-water

Ingredients:

(  7-8 English muffins)

Levain:

  • Raisin yeast water ( from refrigerator)  65g  My refrigerator is set up 6℃
  • KA AP                                               65g

------------------------

Final dough:

  •   Bread flour                  300g
  •   water                          170g  ( DDT 76F)    
  •   Honey                            8g
  • Shortening                12g  (  Shortening - Soft crust / It is easy to bite off-- I like this better,  Vegetable oil-- Chewy crust)
  •   Salt                                5g
  • Corn meal and 50% KAAP/rice flour for dipping
  •  * I dip 50% KA AP/ 50% rice flour mixture for the top, white corn meal for the bottom.

Method:

1. To make the levain----Put the raisin yeast water and alcoholic raisins in a container.

 

2. Add the KA AP and mix with a plastic spatula and leave it at room temperature at 70-74F for overnight.

  

3. Next morning( 12 hours later) : My levain rose tripled in bulk.

  4. Put the levain in a food processor and run for 30-40 seconds until the raisins are smashed well.

5. Mix the levain and final dough except the salt and the shortening( Sorry this picture is old -I used 12g vegetable oil at the time)-- Autolize 20 minutes-- Spread the dough on the surface and add the salt and the vegetable oil in the dough and combine well and knead until you pass the window pane.

 

 6. Divide it into 7 or 8 pieces. ( About 7 for 70g each /8 for 83 g each )--- Bench time 15-20 minutes ( Cover them with saran wrap or dump towels)

7. Shape and Proof: place the dough on a sheet of parchment paper on the baking sheet. ---Proof :3-4 hours

 I dip the bottom in some white corn meal first,

 and ,dip the top in some 50% KA AP /50% rice flour.

 

 

 

 ----Preheat the oven at 350F 20 minutes before baking.

8. 4 hours later.  

 

Note: When you transfer the dough, You might find out it is difficult.. I do this way:

 OR

9. preheat the hot plate at 350F. Cook one side for 2-3 minutes until yellow golden and flip over the other side to cook 2-3 more minutes until yellow golden as you achieve the crust color.

10. Bake at 350F for 10 minutes and cool them on the rack.

 

Note: My yeast water's strength --100% yeast water levain : flour = 1: 2  is fermented in 6 hours.  I bake these English muffins in 5 hours  after finish kneading the final dough.   * 6 hours -1 hour =5 hours.     I am trying to bake them 1 hour before it is fully fermented.  I got the kind of idea from Mini oven. Thank you, Mini !

--------------------------------------------------

* I used 177g water instead of 170g water on the final dough in January.

 

 

Best wishes,

Akiko 

txfarmer's picture
txfarmer

Mini's Favorite Rye - mostly happy, but have questions

I have been making mini's favorite rye (posted here) several times now , this last batch was my best so far with good volume, somewhat even distribution of small air pockets, and of course great flavor and moist mouth feel.

 

Baked in 3 mini moulds: one mini pan de mie pan (from China), two mini (0.25 quart) cast iron pots. Very cute and gave me an opportunity to test out different shapes.

 

While I am mostly happy, there are still imperfections and questions:

1) Since rye doesn't have gluten, everything I read says 100% rye dough doesn't need any bulk rise. However, mini's formula not only has a bulk rise, but a 3 hour long one, followed by a proof (mine was only 80min long). I have made high percentage rye with no bulk rise before, I think mini's method gives me better crumb results. Why? What does this bulk rise do? Are the bulk rise and proof in fact just a very long rise, interrupted by shaping and redistribution of air pockets? Which then leads to a more even crumb?

2) I steamed the breads by covering the moulds with another mould/pot

I baked them at 460F for 10min, removed the lids, gradually lowered the baking temperature until done. When the lids were first removed, I noticed that all three doughs rose very high, well above the moulds. However, after that, as they got baked more, they shrank somewhat. In the end, the bread still domed well and had decent volume, but I am wondering what caused the shrinking? And what can I do to prevent it? Is it because rye dough has no gluten to trap all the air gas? Should I have removed the lids later/earlier? Or maybe higher/lower heat?

3)While crumb was mostly even, but the following picture does show that the bottom layer was a bit denser than the top. How can I fix the bottom? Longer/shorter proof? Higher/lower temp? More/less steam?

 

Anyhow, you may think I am nitpicking, but in fact I am super happy with the breads, just want to make them even better. The crumb shot in mini's post is my dream goal!

 

Sending this to Yeastspotting.

Pages