Grading Wheat Berries, and black point.
I wanted a convenient place to store these links about "blackpoint" and other defects in wheat berries.
By hand-sorting a sample, you can tell if you are getting US Grade 1 (highest), US Grade 2, or US Grade 3. I once had a bag of wheat berries that were barely Grade 2.
---
https://en.wikipedia.org/wiki/Black_point_(disease)
No pics. but this is noteworthy, as I have seen it elsewhere: Some authorities make a distinction between "black point" and "smudge". For them the disease is "black point" from initial infection until more than half of the kernel is infected, or when the disease has entered into the seed's crease.
---
Pics, click to enlarge: http://wheatdoctor.org/black-point
---
https://gipsa.usda.gov/fgis/handbook/grain-insp/grbook2/wheat.pdf
Scroll down to Table 1, and be sure to read it's footnotes. Interesting to note that the "total" defects allowed is not the sum of smaller categories of defects. You could have a sample in which defects of various types are all within the limits of those types, but when added together, they exceed the total percent of defects allowed.
---
https://baylor.agrilife.org/files/2011/06/blackpointnebguide_2.pdf
Pictures and description of blackpoint.
---
http://ipm.ucanr.edu/PMG/r730101111.html
univ of California. Good pictures of blackpoint. Repeats 2% max for US Grade 1, 4% max for US Grade 2.
---
For Canada:
https://prairiesoilsandcrops.ca/articles/volume-4-18-print.pdf
This is mostly about durum. Different standards apply to durum than to red wheat. Note that Canadian standards for the same grade numbers are lower than US.
---
UK:
https://cereals.ahdb.org.uk/media/314137/pr210-final-project-report.pdf
Long and technical. But some good pics and diagrams to identify extent of blackpoint.
--
Thanks for posting this. However I have a few questions:
The various articles seem to relate the condition to the viability of the berries when planted. Did you find any information relating to the condition's impact on the wheat's suitability for bread or any information about the condition's impact on the healthfulness of baked goods prepared with a high percentage of it present in flour?
Is there any reason to believe that reputable retailers of grain are cutting corners and selling home millers substandard or improperly graded wheat?
I am aware that one fungal infection of rye, ergot, can have serious implications for human health. Is this fungus also able to infect wheat?
Again, thanks for researching the topic.
Jaog, I didn't read those articles in detail, just skimmed them. however, somewhere, either in those pages, or other web pages, there is mention of effect on human health.
for one disease that affects durum, some article mentioned "ppm" for the blight or fungus, in order to be approved for human consumption.
Not in those cited above, but some article talked about how during a wet year, a very large percentage of Canada's durum had to be diverted to animal feed. Recently durum in NW North Dakota and NE Montana had some blight, enough to really mess up the farmers, and likely mess up the pasta market.
I hand sort all my grain prior to milling, 1/4 cup at a time. I put a rough white paper towel on the counter, then a smooth sheet of parchment on top of it, spread out the grain, shake/jiggle the parchment, and remove obvious:
Broken kernals dry out, so those and the green, or dessicated, or shrunken kernals are going to affect dough performance. At what percentage, I don't know. The implication of the US Grade standards is that there would be something noticeable between Grade 1 and Grade 2. But Grade 2 is supposedly suitable for human consumption, and I think Grade 3 and 4 are for animal feed, but don't hold me to that.
I may shake/jiggle the parchment, or run my hand over the grain to get it to flip more. I had one "less good" batch/bag of HWSW (not PG) that had about 4% blackpoint that I felt bad enough about to remove by hand. I actually weighed some samples and some takeouts. So it was barely US Grade 2.
The only real problem is if a vendor is selling something at a Grade lower than advertised. If you get Grade 2, you can't complain unless it was advertised as Grade 1. You might have reason to squawk if the Grade was not specified, and you were charged Grade 1 "prices" (ie, an "implied" specification) for a Grade 2 product.
Retailers probably do not inspect grain if they arrive in sealed bags, and sell only whole bags. But then, any reputable retailer would want honest customer feedback anyway, especially if the customer is not satisfied.
Bulk bins at grocery stores can be tricky, if there are no date codes, or if bins are at floor level and bugs have access, or low turnover causes the grain to dry out.
I forget the exact year, but around 2005 or 2006, it was just a wet year, and a lot of white spring wheat went out as Grade 2 due to black point. I understand that a grower's big commercial contracts are going to get serviced first, and grain destined for the home market takes a lower priority.
The Kamut that I get from CLNF is by far the best grain I've ever purchased, in terms of having to remove defective kernals.
I live in an area that gets free shipping from CLNF off their own trucks if you order at least $400 or $450. And there is a local lady who does group orders. See their two "truck delivery" pages with links at the bottom of their main web page. Call or email, and they can tell you if there is already a group order person in your city.
Thanks for your reply. I also visually inspect grains before I mill, though perhaps not as intently as you do. I have used CLNF for purchases and have been satisfied with their quality. I'm wondering how this year's cold and wet spring will affect the wheat that's harvested. I guess we'll have to keep fingers crossed and eyes peeled in the future.