GM New Organic AP and Croissants
I was in Walmart last week and noticed a new green bag on the shelf next to the bright yellow Bread Flour from Gold Medal. It could be that this isn't a new offering from GM but it's the first time I have seen the Green package. I thought I would try a bag and see how it like it compared to other AP flours I use. First, the price made me take a second look. It was priced at $4.74 for a 5 pound bag. The Bread flour next to it is $2.65.
I have been wanting to make a batch of croissants so I thought his would be a good recipe to try my new organic AP on. A better test for me will be a French bread since I'm struggling with my laminated dough skills. Next time. Some people use a stronger flour for croissants than AP. I like the tender crumb I get from the AP. I used SteveB's recipe and procedure which I have enjoyed for some time. My croissants don't look any where as good as Steves or Larry's or Andy's and probably everyone else but they are delicious! Every time I make these I swear I'm going to buy a sheeter even if I have to put it in the garage.
Proofing after 1st egg wash, under the cover. These half sheet covers are just terrific for these.
After 1st egg wash
A little crowded for good browning:>(
A small sample with my name on it :>)
Reasonable crumb and very nice flavor!
Comments
Hi Eric,
You don't need a laminator, as your hand skills are just great. However, if you want to turn them out for your local Farmers' Market, a pastry brake [as we call it in the UK] is a great machine!!!
Great colouration, but I'm seeing something really significant in why you bake on a lower heat. I think you have too many of these delicious fellows on one sheet. It could be the photograph, but they look too cramped together, and have almost joined up in the baking. As it looks from the photo, I would only 9 croissants on that tray; 3 rows of 3. The spacing is very significant. It could be that the photo is deceptive.
On the flour; our Nutritional Info [UK] generally gives 100g serving, which is really useful as that means amounts are in %. I can't read what the serving is on the back of the pack you photgraph so wonderfully. I'm thinking the protein level is about 10.5 - 11%. That is only ever a guide, however. What I'd be pretty certain of is that the protein will be typical of most North American flour and be of the highest quality. If you were facing up to using UK flour of equivalent strength, the protein content would most likely be of a lower quality. But for character, there is, as you well know, a lot more to it than that.
It's breakfast time here, and I'm reaching out for one of these delicious pastries
All good wishes
Andy
Hi Andy,
when speakong about the protein content of flour can I just ask how is this calculated in th UK? Is it based on 14% moisture as in US or is it determined only from dry matter as in France or Germany?
Thanks,
zdenka
Hi Zdenka,
thanks for the question.
I'm pretty sure we are in line with Europe on this, but am double-checking.
I've found this onour Home Grown Cereals Assoc. website: http://www.hgca.com/publications/documents/varieties/milling_wheat.pdf
Best wishes
Andy
Hi zdenka,
This information is all from: Cauvain, S. P., Young, L. S. (2007) The Technology of Breadmaking. 2nd Edition. New York: Springer - Verlag, pp.357 - 369
Seemingly, protein content is "declared on an 'as is' basis, that is as a percentage of all the constituents including the moisture."
It then goes on to explain the disadvantages of this, and the further tests a mill would carry out, by drying out the grain, then re-calculating the protein proportion.
The folllowing illustration is given:
Protein [%]: Dry Matter Basis [dmb]: 10%. With moisture of 8%: 9.3%. With moisture of 15%: 8.7%
My expectation is that the moisture level would be assumed to be 14%, when carrying out the initial tests
Hope this clarifies to the full?
BW
Andy
Thank you Andy.
no problem with maths, it is easy to calculate / convert the two different ways of how the percentage of protein is declared. It seems from you first comment and the attached link that in UK it is based on "dried matter" as in the rest of Europe. Does your second comment relates to this? I quess - as the book was published in NY, that it describes the american standard.
I was just wondering how "strong" is the strongest flour I can get here. It is imported and only available in Tesco (strong organic) and contains 12.6 protein. That would be 10.8 in US.
I really appreciate you help!
zdenka
Hi zdenka,
sorry for any confusion.
In spite of it being an American edition, the text is British, and all the information relates to UK practice.
So, commercially our protein is recorded "as is", on arrival at the mill. Subsequent test are done on the dried grain, as in Europe.
My single best source says that protein, as labelled on the back of retail food bags is as DRIED MATTER, as in Europe. I'm really sorry if this has caused confusion.
The strongest flours you will find on the Supermarket shelves will be labelled "super-strong", or something like, probably for "Breadmaking Machines" Both Hovis and Allinson brands are definitely available.
My preferred brand of strong flour is "Carrs Breadmaker Flour"; it is a very high quality flour based on their commercial "Special CC", which is the premium flour I use in College for student work.
Best wishes
Andy
Now your explanation is clear Andy. Thank you very much!
Unfortunately, the flour made for Tesco stores called "Strong" which is imported from UK is the only one with higher protein level one can find here. And it is available only in bigger cities.
Most people here have just used T530, T650, and T1050 for all yeast and sourdough recipes for centuries... but as for protein content it is actualy what in US would be called "cake flour" (9-11% protein in dry matter). But I would just say it is more difficult to work with these flours when you want to follow principles such as decreasing yeast, using whole wheat or whole grains, increase hydration orr make pure sourdough. Nevertheless the result can be very similar to that with very strong flours.
Actually I have now the chance to test some US flours (AP, BF, WWW, WW) and I have almost impression that they just do the work themselves. Very "fool-proof" might be the right adjective.
But really thank you for your suggestions. One day I am in UK I will certainly look for Hoviis or Allinson brand :-)
zdenka
Your croissants look awesome! Look very delicious to me.
Shiao-Ping
Thank you for noticing Shiao-Ping. They are delicious and totally off my diet. But, now and then.
Eric
Eric you have done a masterful job executing these croissant. I noted when I looked at Steve's site that he is not posting since March. His formulas are wonderful and will be missed. I look forward to trying these I haven't made them in decades...time to try again. c
Thank you for your comments. I have enjoyed Steve's attention to detail in executing some of the most interesting breads of the World. I'm sure it is time consuming to keep up such a beautiful site so I'm not surprised to see him taking a break. The same thing happens here. People come to learn and build skills. After they gain the ability to bake those breads they desire, some back away and monitor which is fine.
Eric
Andy the serving size is 1/4C or 30g.
Thanks for your comments. Haha you are so subtle. Yes it must be a photographic effect where there are 50% more products than there should be. You know, I had planned on dividing the dough into two. I have the chocolate batons for the Pain au chocolat and want to make some of each. Unfortunately, I was having so much fun cutting triangles that I coasted through the dough without thinking. So I secretly hid 2 sticks of this wonderful chocolate goodness in a couple of the larger shapes.
I should have noted on the baking temperature that I started out at the 375F that Steve uses but at the 5 minute point I recalled that he has a convection oven. So I bumped the oven to 415F. I also added an additional 5 minutes to the time for a total of 25 minutes.
If you look at the image on Steves post on croissants, you see what I consider to be the perfect croissant. You can tell from the crust that it will be crispy and flaky. My effort last night resulted in just so so flakiness. Slightly tough would be my honest appraisal. I love the even golden brown color on his.
My next batch will be using your no sugar formula and full on heat.
Cheers,
Eric
Boy they look plenty flaky to me! We both need to work on our shaping skills - but given the wonderful product you've created, practice not only makes perfect but makes for many enjoyable breakfasts!
Nice job.
Larry
Larry, I was reading your post where you mention freezing and eating later. When you spritz them and warm them up, you don't thaw them at all first do you?
Eric
Eric, the first time I tried baking fully proofed croissants without thawing them. Disaster! From that point on, I've frozen unproofed croissants. I'll transfer them to a covered pan in the fridge for about 12 hours (so the night before). Then I allow them to proof at room temperature for about 2 - 2 1/2 hrs, apply eggwash and bake. That method works well.
As Andy pointed out to me, however, you can also bake them at the time they are shaped, and then freeze them. I've had good success with this too. I allow them to thaw for about 1 hour (it doesn't take long since they are so light), apply a quick spritz of water, and put them into a 300 F oven for about 5 minutes. Allow another 5 for cooling and good eating!
Larry
Thanks Larry,
I want to make a batch and freeze them right after shaping. I would love to have some I could bake in the morning.
Eric
Hi Eric,
Your croissants have expanded magnificently; to the point where they have come too close together for effective baking.
I dare say this has considerably reduced the flakiness you were looking for?
Clearly, extremely handsome croissants, as I see them
BW
Andy
Ah, such temptations you show!
Thanks Lindy!
Those look wonderful!!! I love the progression photo's. You make it look so simple and we know it took a great deal of expertise. You certainly inspire with everything you post my friend! The Fresh Loaf is lucky to have great teachers like yourself!
Audra
Thanks Audra. You are definitely a member of the fan club. This wasn't really an instructional post really. I wanted to try the new flour and since I'm a bachelor for a couple days, I can make what ever I like and eat like it doesn't matter. You should have seen the steak last night. Mmmmm.
Eric
These look great! So is the flour worth the extra price? I have seen them lately too.
ps. I've found a heavy pastry roller (big and thick in the middle and two handles on the side) helps a lot. I got one and mine come out much better than when I was using my skinny wood roller.
I don't mean to complain about the price of flour. It just surprises me that a big miller like Gold Medal would price two similar products so far apart. In general I like to find a reasonable flour that I like the flavor and color of the finished product to use as my regular go to flour. The malted barley that is usually added has a lot to do with the color of the crust. Some of the croissant recipes use malt as an ingredient. It makes a big difference in the color and a little goes a long way. This flour does not list malt on the label.
I'll have to look for a larger rolling pin. That would would probably help, thanks. And thank you for your comments.
Eric
Looking at your croissants makes me drool. You mention wanting to get the even coloration so I notice that your baking pan has high sides and the croissants are close together as Andy has observed. You may want to try to bake them on a cookie sheet with some separation between them. Another trick I find useful is to give them 2 very light eggwashes, one before proofing and another one just before baking.
I could use a couple of those for breakfast right now!
Don
You are correct that the pan has higher sides. I don't usually use it for baking things like these but as you indicated, it was a little crowded so I didn't try to transfer to a more shallow pan. It was late and I started slacking off. It's a wonder these turned out at all actually. I was multi tasking all day and ended up leaving the dough in the cooler for a full 24 hours. Add to that the European style butter I was using wasn't spreading as nicely as I would have liked. I had quite a bit of butter in the bottom of the pan that melted and ran out which I don't remember seeing in the past.
The double egg wash is a good trick. What do you make your wash from? Yesterday I just used a single egg and a T of water and a half pinch of salt.
Eric
My eggwash is the same as yours except I add a half pinch of sugar as well to get a little sweet salty taste on the crust.
Don
My resistance to making croissants is getting as flakey as your pastries ... They look delicious!
David
Thanks David. Wait till you see the onion pockets I'm working for Norm and Stan.
Eric
Hi, Eric.
Hmmm ... Not onion rolls? Sounds intriguing.
I made an extra-curricular batch of Norm's double knotted rolls yesterday for hamburgers. They were superior to any soft sandwich rolls I've every had, although there are some wonderful-looking recipes I've not tried floating around. I didn't get pics because I had let my camera battery run down. <blush>
I'm baking a couple sourdough breads from AB&P today that I've never made before. Stay tuned. The camera battery is now fully charged.
David
I'm a little late to post! Oh how I love pastry, croissant's especially and yours are making me drool. Isn't it amazing how they puff and the flavor...yumm. It has indeed been a very busy month for me and I almost missed these...my oldest granddaughters graduation and a week full of parties, beachhouse and then she's off to Maui with friends and mom's before she leaves on her way to college..I can't believe where time flies and my littlest granddaughter is on her way to my home with my son and daughter n law. I hope to get some baking done before they arrive. How I would love to have some croissant and pastries ready.
Sylvia
This has turned into an interesting thread about the properties of flour. I certainly don't mind adding in your interests here about protein levels. I was curious how this new flour would perform. You all are using a better approach of trying to understand in advance how to evaluate the product and it's suitability for a purpose. My hat is off to intellect anytime.
Eric
Thanks for your indulgence Eric!
Ananda´s explanation helped me to understand better the behaviour of the UK flour I use and to compare it with US recipes.
Have you already tried to use organic Gold Medal AP for bread?
I also wonder whether vitamins are added to all AP flours in US.
Kind Regards
zdenka
Daisy_A,
There are so many things that can change the outcome of a bread evaluation, it's hard to know after only one attempt with a new flour. That said, I thought the crumb wasn't as dried out or maybe a better way to say it is the croissant was a little heavy. That could be because I didn't bake it long enough or the dough hydration was a little high. The crust was browned about right and the oven temp was lower than some like it. That leads me to think, all things being equal, the flour must have some malt in it which is common. It isn't listed on the label but it bakes like it is.
zdenka:
I'm going to make a batch of French Bread today, using the GM Organic AP. Just a lean simple recipe I have made a hundred times. We'll see how it goes. Your question about the addition of vitamins is hard to answer. I think most milled flours sold on the shelves are what they call "Fortified". I'm NOT and expert in this area at all so I'll say right off that this is my impression only. I see the "with malted barley added" on most flour bags. You see the word "Enriched" a lot. I'm a big fan of freshly milled WW and Rye flours. I buy them from an organic farmer who has a small milling operation in the Midwest US region. The products I make using that flour are so much better than anything I made with store bought flour, I would never go back. Of course the fresh milled flour does not have any additives or malt added. But, for my AP and Bread Flour, I want a reliable quality, inexpensive source. I have always felt that you can adjust your procedures to make good bread from any or most commercial flours, it just takes some experimenting. I notice in your profile you are from CZ. Is that Czech Republic? What kind of flours are available?
Eric
I´m looking forward to your testing with new flour Eric.
Yes, CZ = Czech Republic. The flours here may be similar to France or Germany, though it seems that the more you go to the east, the lower baker´s quality the flour will have. Here it is mostly softer wheat - T530, T650/700, T1000/1050, T1800. But you can find 4 stages of granulation (going from the the flour you know to what would be similar to cornmeal consistency or semolina), and of course convention and organic products are available. The protein content is about 9% when speaking in US mearures.
Then there is rye T930 and T1700 (T500 is not sold in shops). Actually the most traditional Czech bread is 45-55% rye prepared with 3 stage sour. But although this is still the most common (and also cheapest) bread you can find, many big and small bakeries abandon the traditional methods and prefer using pre-prepared mixtures, commercial (stabilized) sourdoughs and yeast. It may be due to the worse qualty of wheat as well. I was told that nowdays a bakery cannot survive without using dough enhancers. (Well, one reason I prefer bake our own bread at home)
And of course other speciality flours - spelt, kamut, red wheat, buckwheat...
I think everybody bakes here. You can find good quality fresh yeast (and even several kinds) even in the smallest shop. But most people just use white flour and make sweet "buchty" (sweet yeast dough with various fillings), things similar to challah or brioche (we have many specilities in this field) and "knedliky" (yeast dumplings - either with sweet filling or as a side dish for meats with sauces). Then bread machines are quite popular. But few people bake their bread regularly and are concerned about more healthy flours and sourdough. But ot may be the same in other countries, I think.
In any case, I am very happy that there TFL exists and very grateful to all members here for their posts, ideas and help!!!
zdenka
Eric, I have seen this flour GM organic often in my local stores. Do you know the protein content?
Sylvia
Hi,
I've spent the day working with 2 students producing Naan breads [12 huge elephants ears], Chapatis [100], and seeded knotted white rolls [220]. It's HE results time, so I was up before "the board" to justify my gradings for 5 sets of results too...plus regualr teching commitments. Oh, and we had the audacity to go for a night out watching some dnacing at "The Sage" in Gateshead last night.
Anyway, that's by the by. Where do we go with this?
Eric's post, as ever, is pertinent in that we do need a reliable "regular" type of flour from a performance point of view. I suspect, in this particular rspect, the North American market is probably better served than the European...and zdenka's comments certainly seem to bear this out [more in a minute]
Daisy_A, what brand of "AP" flour did you use? I only ask, as I have never found this classification on retail shelves in UK. Our "Plain" flour is not at all suitable for making bread. North American "AP" is! Whilst UK "strong" flour has been milled for breadmaking purposes, we don't have a halfway type of flour which can be used for all types of baking, at retail level...unless I've missed something over the years. Commercially, a "Baker's Grade" flour is on offer, which is equivalent to "AP". Basically, there are many parts of North America where the climate is suited to growing wheat with excellent QUALITY proteins; vastly superior to Europe and the temporate Mediterranean climate. So Eric's AP flour will be far more suitable for croissants than any flour available in UK, apart from the reliable flours, labelled as "strong".
Regarding "fortification" of flour, I'm sad to say this is done on "health grounds"!!! Governments recognise that sufficient people have diets lacking in particular essential vitamins and minerals, and so take a decision to add substances such as calcium carbonate to provide for the missing magic. Folic acid is the current hot potato. Wholemeal flour is just that, by the way. So if you want the pure, wholegrain you have to buy this type. It's patronising bollocks, if you ask me, but I think I may be accused of gross over-simplification of the food policy arguements by some experts were they to read this comment!?
With regard to malt, this is not used by UK millers. Enzymes are now rife in our flours, as, very conveniently, these do not have to be included on the label, as they are classed as "processing aids", and are not chemicals. So they are, apparently not deemed necessary to class as additives!!? How so, is the immediate question coming to mind? Anyway, that means millers add fungal amylase to the grist, not malted barley flour. The purpose is the same, and is not really that contraversial. It is to provide for that consistent performance, sought after by both posters mentioned. The amylase content greatly affects the rate at which complex starches are converted to sugars for the yeasts to feed off. This is what brings about a predictable and reliable fermentation rate, in relation to mixing times [ie dough development, by whatever means], dough temperatures [ including retardation, BFP etc], and level of yeast used [including amount of pre-ferment, whether natural, or baker's yeast based, and, how active this is!] Obviously a whole variety of other enzymes are used, but they tend to be added in an "improver", rather than by the miller. This is pretty key information, actually.
The problem for zdenka is that the German classification of flour being referenced takes note of the ash content, but gives no idea of the protein content of the flour. It equates to UK % extraction system, which is still used, in approximation, but, again does not "categorise" flour. So, 100% wholemeal, 85% wholemeal is a "brown" flour. White, roller-milled flour is about 72%. These just about equate to what zdenka references in the "T" numbers above, which relate to the residue proportion when the flour is burnt. There are many excellent posts on TFL which discuss the impact of the vitamins and minerals on rates of fermentation. These are in the wholegrain flours, forming the residue, or ash content, deemed so important to Europeam fl;our used for long fermentation. Trouble is, it makes no reference to the protein content, or quality, deemed essential for consistently good bread qualities.
There's a lot more to it than this; but, this gives plenty of food for thought to add to the already excellent notes made above. Thanks to all, and, Eric: sorry your post got "hijacked" by another topic. Tell us how your French bread turned out. please.
Best wishes to all
Andy
I don't know any more than what's on the label. To be honest I've never sat down and figured out how to make sense of the info on the label as it relates to protein. In the end you have to use the flour and decide for yourself if you like it.
Eric
My first test with this flour will be to make pie and tart crusts and cakes. Hopefully that time will come soon as I said earlier this has been a busy month...I had a whole swarm of bees arrive today to make home in my attic....no baking today!
Sylvia